De'longhi ECAM 22.140B Water Tank (for purges)

This is a remix of initial model (thanks to the initial author who did all the work).

The initial model does NOT work for my De'longhi ECAM 22.140B nespresso machine :

• it is too high (so not possible to put it in place)
• the internal “tube” is not at the expected place

However, the external structure is 100% OK (hence why i printed the original model, before discovering that i had just wasted ⅓ of a spool as in the end it was not fitting well)

So i tried to “remix” the initial STL : being just a .STL and not a STEP file (or anything else), i haven't been able (under Tinkercad, …) to have the proper level of quality …

So i had … to be creative and to do everything at slicer level (and in the end, it worked fine this way !). The needed manipulations are :

• cut the object exactly in two, mirror one part and re-assemble (to remove the internal “tube”)
• reduce the height by 14 mm (with a removal cube at the top)
• add a logo at the bottom side (just because it's easy, by importing a .SVG logo as a removal part)
• remove the email address under the tank itself

Attached .m3f should be directly reusable with Bambu Studio (see the screenshots). It's probably NOT going to be openable in other slicers (but feel free to try and to redo what may be wrongly reimported).

Do not get confused by the preview here on Printables - the top box is just a removal part (it won't be printed) - that kind of removal part is just not correctly rendered by the Printables.com preview.

Printed on my side in 9 hours on a Bambu X1C, with PETG and Textured PEI plate.

Video of the print :