Tweezers for Connectors JST-XH

Has a fair grip on JST connectors and is surprisingly sturdy for being so tiny. Definitely recommend printing it in PETG.

Used them to take out my extruder from the X1C. They work fine. I made them with PLA, but I recommend printint them in the toughest material you have. The PLA ones flex a bit much for my taste. (edited)

Prusament PC

Very useful.

Printed in Prusament PETG Jet Black. Works mainly for connectors with more then 2 wires.

Super useful.

Printed in abs, works fine but have trouble pulling out the connector

Very handy for many things beside jst connectors. Quick easy print.

Printed in clear PETG
I still need to see how well these work but it's got to be better than just using my fingers.

Great Model Easy to print
IMO a little to fragile, It does the job!

Filename
tweezers_JST XH_Size1_and_size2.gcode
Filesize
480.6 kB
Last Modified
Mar 22, 2023 8:17 PM
Status
Completed
Start Time
Mar 22, 2023 8:17 PM
End Time
Mar 22, 2023 8:30 PM
Estimated Time
8m 35s
Print Time
10m 31s
Total Time
13m 20s
Estimated Filament Weight
0 g
Estimated Filament
969 mm
Filament Used
1016 mm
First Layer Ext. Temp.
230 °C
First Layer Bed Temp.
110 °C
First Layer Height
0.3 mm
Layer Height
0.25 mm
Object Height
7.05 mm
Slicer
SuperSlicer
Slicer Version
2.5.59

Nice for those little pieces. Best if printed in PETG. Thanks for sharing