OverWatch Logo 40x40 multi parts

I decide to make a big logo, but my printer only have a 20x20 bed, so i design this in multiple parts to be able to print on my prusa.

This logo is 40x40 once assemble, depend on your printer bed size you can increase the printed parts size.

UPDATE: Spacer + Spacer screw add ( this will allow you to set the distance between the wall and the Overwatch logo, so the light can be reflected.
I did glue this parts with epoxy.

Material that i use:

• Prime spray
• Orange spray
• Metal spray
• M3 screws / nuts

Print instructions

Category: Signs & Logos Summary

I decide to make a big logo, but my printer only have a 20x20 bed, so i design this in multiple parts to be able to print on my prusa.

This logo is 40x40 once assemble, depend on your printer bed size you can increase the printed parts size.

UPDATE: Spacer + Spacer screw add ( this will allow you to set the distance between the wall and the Overwatch logo, so the light can be reflected.
I did glue this parts with epoxy.

Material that i use:

• Prime spray
• Orange spray
• Metal spray
• M3 screws / nuts

  Print Settings

Printer: BQ prusa I3

Rafts: No

Supports: No

Resolution: 0.3

Infill: 20%

Notes:

Easy print.