Stepper motor covers with Prusa logo for i3 MK3/S/+ and MINI/+

I designed covers to attach to stepper motors on the Prusa i3 MK3/S/+ and MINI/+. The name of these printers are written on the top, so you can choose the suitable cover for your printer.

You can print the covers by manually changing the filament, and the Prusa MMU2S is not required.

If you have a MMU2S, please print the following model. It can print without supports and the lettered side is flat.
≫ Stepper motor covers with Prusa logo for i3 MK3S+, MMU2S/3 and MINI/+

Print settings

• Slicer: PrusaSlicer 2.5.1
• Based preset: 0.15mm SPEED
• Layer height: 0.15 mm
• Infill: 15 % grid
• Temperature:  nozzle 200℃ / bed 65℃
• Rafts: No
• Supports: Yes (style: snug)

3D printer & filaments

• Printer: Prusa i3 MK3S+
• Nozzle: 0.4 mm (kaika604)
• Z height: -1.110 mm
• Sheet: Smooth PEI (Prusa Research)
• Filament: PolyTerra PLA (Polymaker)
• Color: Charcoal Black → Fossil Grey → Cotton White → Sunrise Orange

Acknowledgement

This design is inspired by the x-carriage-cover of the Original Prusa XL.

MMU is not required.