HDB Support for FABtotum

This is a printable support for HDB (Head Development Board) for FABtotum.

It is an alternative to the HDB Support from the FABtotum creators (http://www.thingiverse.com/thing:1832391).

It works for me, and fits my FABtotum very well. Hopefully it will fit other FABtotums too.

161228 UPDATE: I made a small change to make some room for the solder pads on the bottom side of the PCB. So now the PCB will lay more flat against the plastic.

Print instructions

Category: 3D Printer Parts Summary

This is a printable support for HDB (Head Development Board) for FABtotum.

It is an alternative to the HDB Support from the FABtotum creators (http://www.thingiverse.com/thing:1832391).

It works for me, and fits my FABtotum very well. Hopefully it will fit other FABtotums too.

161228 UPDATE: I made a small change to make some room for the solder pads on the bottom side of the PCB. So now the PCB will lay more flat against the plastic.

Print Settings

Printer: FABtotum

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2mm

Infill: 100%

Notes:

I printed it with a 0.35 mm nozzle, but hopefully it will print OK with other nozzle sizes as well.

I used 100% infill, but it will probably work with lower values to.

Support is definitely needed!