Marui Hunter Rear Led and license plate holder

Designed those parts initially to reinforce the tubes used to mount the Rear Bumper and Gearbox cover at the rear end of the Hunter chassis.

Since the first parts did not integrate well with the rest of the chassis design, I decided to add some fonction. I added led holders, and a license plate holder, as well the screw used to fix the bumper will also be used to fix this part (plan for screws 2millimeters longer than original ones). License plate is 15*30 mm, and leds are standard 5mm red leds;

This part has been reviewed compared to the initial design from which the prototype is shown on the picture: the thickness of the superior part is reduced to allow the usage of the combined gear cover and shock towers made by The Optima House (https://www.facebook.com/optimaforever).

Note : I removed mention of the Galaxy in the title as I will need to modify the part to be able to include rear roll cage stay in the design. I'll submit a diiferent one at some point.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: PolyMaker PETG

Notes: