Easter Cryptex Egg (FDM Friendly)

An egg that opens when you line up the right numbers. Designed to be easily printable.
27
85
2
522
updated August 1, 2023

Description

PDF

Designed to be easily printed. No support or raft needed. There are 5 pieces to print. All 5 pieces can be printed on a single PrusaMini tray. The printing time is about 8h (0.25mm Draft).

Once printed, the code cannot be changed. To select the code, you must print the part with the corresponding number.

For assembly: no need for glue. By forcing a little, you can enter the rings on the base.

I tried printing the egg large: In PrusaSlicer I changed the size to 200%. And it works! (It's the egg in the background of the photo)

To print :

  • OC_V2-bas.step
  • One of the STEP files that starts with OC_V2-Dessus
  • One of the STEP files that starts with OC_V2_rondelle_haut
  • One of the STEP files that starts with OC_V2_rondelle_milieu
  • One of the STEP files that starts with OC_V2_rondelle_bas

Tags



Model origin

The author marked this model as their own original creation.

License