Couch Puzzle Box MOVED TO MY MINI FACTORY ONLY NO FILES HERE

Edit: THIS MODEL HAS BEEN MOVED FROM THIS SITE

It can no only be found here:
mmf.io/o/138678

---------------

This couch shaped puzzle box is a 10 piece puzzle box. It's a fairly easy print with only a few supports needed.
Assembly doc and solution video and doc below. There is a tolerance test print included in the files. (They should fit together enough to move)

Assembly Instructions:
https://docs.google.com/document/d/1DgIZGCO_V3mSPxKcuzWERLBkMVjhK-2h7hyDEmEE4JY/edit?usp=sharing

Solution Instructions:
https://docs.google.com/document/d/11bBf2fozzo7lVhbE14RS5D4-p1sgyhX-tp7WHCsCih4/edit?usp=sharing

Solution Video:
 

Print instructions

Rafts:
No

Supports:
Yes

Resolution:
The lower the better. I used 0.10mm for the smaller pieces and 0.15mm for the bigger ones

Infill:
15%

A little bit of glue is needed to assemble it. Make sure to print the test tolerance print included in the files before printing. Use the horizontal expansion settings in Cura to make it fit tighter or looser. It should fit so it can slide on its own but only by a little.