World's Worst Parker Trophy

I wanted to create a trophy for the world's worst parker. Here it is. It is designed for multi-color printing, and I have uploaded two 3MF files you can import directly into Bambu Studio. One requires two AMS, as it prints using six colors and a support interface filament, while the other only uses four colors so that you can get by with one AMS.  There is also just the STL file so you can print it on a different printer or paint it however you want.

Thanks to Simusis and Terrain4Print for having a car and rock, respectively, available for use in remix form so that I didn't need to reinvent the wheel for those parts!

Supports are required. I used organic supports with a support interface material, but that isn't completely necessary. 

Estimated print times per Bambu Studio (0.2mm layer height):

• 6 color with support interface - 21h54m
• 4-color with support interface - 11h35m
• 4-color without support interface - 8h17m
• Single color without support interface - 3h53m.

Trophy design inspiration came from the infamous West Maple Omaha Rock.