PSU Window Cover for Phanteks Eclipse P500A / Evolv X

This is a printable, customizable insert for the PSU cutout on Phanteks cases. I made this file because my SuperFlower PSU has a data sheet on the side facing out when installed fan-down, which isn't very good looking. I modeled this case off my P500A, however the Evolv X and P600S share the exact same interior, and you should be able to use them on all 3 interchangeably. The G500A should work with this print, but don't quote me on that one. 

The model is a hair loose as a pressure fit, as I expect there to be some variation in sheet metal from case-to-case, but I expect most people will be able to get it to work, even if you might need to put some foam or tape on it to install it permanently. Personally, I attached some craft foam to the bottom face where it rests against the case, and it friction fits just fine. I was even able to install it without removing my PSU, by simply passing it through the PSU shroud from the back side. 

This model can be customized with your own logo or text, just do a negative extrusion from the top plane.