P1P/P1S Thermostat w/fan controller

After building the Arc enclosure for my P1P, I needed something to control my ambient temperatures. I opted for the Coolerguys Thermostat Controller because it was direct plug n play with 3 pin fans, cheap, available, programable, and came with a sensor. This simple housing works perfectly to provide degrees of freedom for anytime relocation as well as extra room inside the magnetic back panel for hiding extra wire length. 
 

UPDATE: With the release of the P1S users of both the P1P and P1S can now control your fans through the printer However you will still lack a temp sensor but this controller can be used as a stand alone or if you want to add other fans such as the ones inside the Bento Box. 

What you need:

Coolerguys Thermostat Controller

https://www.amazon.com/Coolerguys-Programmable-Thermostat-Controller-Standard/dp/B08FBTC2BR/ref=sr_1_3_mod_primary_new?crid=1YZPTMRYFR5EA&keywords=coolerguys+thermostat&qid=1679150437&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=coolerguys+thermostat%2Caps%2C105&sr=8-3

8 count of 6x3mm magnets (for backplate)