3D Models Hobby & MakersOrganizers

Glasses Holder

6 reviews
Simple holder for glasses. The overall size is about 150mm x 45mm tall x 35mm deep. Use two screws for mounting.
43
263
6
1481
updated October 11, 2020

Makes

Comments

SaNi1974 12
SaNi1974
@SaNi1974_833174

Hi,
needed a holder for my glasses in the bathroom and your design ist very nice!
I needed to remix it a bit so i could fix it with suction cups and grab my glasses better.

Thank you for your work!

Reply 1 like July 12, 2024 at 11:32 AM
Sovol SV06
Fraham 19
Fraham
@Fraham
Reply 1 like April 24, 2024 at 8:33 PM
Prusa MK3/S/S+
Phantom 14
Phantom
@Phantom_1328918
Reply 1 like November 19, 2023 at 10:27 PM
Bambu Lab X1E
Ceppetoswerkstatt 17
Ceppetoswerkstatt
@Ceppetoswerkstatt

I printed it for the sink at my work. The Design is perfect thank you so much.

Reply 1 like February 24, 2023 at 2:48 PM
Bambu Lab P1P
GarageMonkeySan 7
GarageMonkeySan
@GarageMonkeySa_94062

You're welcome!

Reply February 27, 2023 at 6:37 PM
Mrfloop 14
Mrfloop
@Mrfloop

Draft mode / 20% infill / Hatchbox PLA

Going to tinker with this, and make the base layers a bit thicker so it can safely be used as a cellphone holder as well. (edited)

Reply 1 like May 1, 2022 at 6:11 PM
SkydiveMann 13
SkydiveMann
@SkydiveMann

Printed in glow in the dark so I can find it at night

Reply 2 likes March 21, 2022 at 11:00 AM
GarageMonkeySan 7
GarageMonkeySan
@GarageMonkeySa_94062

@SkydiveMann Clever!

Reply May 27, 2024 at 5:09 PM
nabil 11
nabil
@nabil_144756

au top !!!!

Reply July 18, 2021 at 3:28 PM
GarageMonkeySan 7
GarageMonkeySan
@GarageMonkeySa_94062

@nabil_144756 Such a cool idea to print in glow in the dark! : )

Reply March 21, 2022 at 5:38 PM
All comments loaded