Mac Studio Under Desk Mount

A under desk mount for the Mac Studio. It should be attached to the desk using 4mm screws that are long enough to get a hold, but not long enough to break on through to the other side! Personally I used 20mm screws.

I printed mine in PETG, and probably would suggest you do the same. Supports aren't required other than for the Apple Logo - I just painted on supports in this area and left the rest alone. The mount just fits on the MK3 bed. You will have to set the Skirt to zero (Print Settings → Skirt and Brim → Skirt → Loops = 0)

The easiest way to mount it is with two people… However if, like me, you don't have any friends then screw up one side, carefully bend the free side down, slide that beautiful Mac Studio in, and then hold up the free end and get screwing. Once it's up then it makes it harder for anyone to remove without a screwdriver. You could use anti theft screws for extra security.

Just in case - I take no responsibility if the mount fails in any way - this is at your own risk.

I'd really appreciate it if you post any makes and whatever you, do don't drop the Mac Studio!