BambuLab Spool Adapter MasterSpool

Hi fellows,
i like that BambuLab Spools a got with my X1CC. In that bundle have been 3 Spools (1 from the 250gr Sample PLA, one from the Support Filament and one from the PA-CF sample. In addition I purchased a additional spool at the beginning. So all in all I had four resuable spools which I like from style aspect. Unfortunatly, they are not usable with the MasterSpool “standard” with coils from DasFilament or from Fiberlogy.

Normally, i am used to eSUn filaments, but the colors they offer for refills are not much. The bambu refills might work, but the the store of them is totally overran in europe. I think with each high speed printer they sell, they can't cover the demand for filaments.

So, a good set of non-functional refill filaments like petg and pla, european companies like fiberlogy and dasFilament offer their masterspool compatible rolls in a different colors without a lack of delivery problems.

Due to style of the Bambu Re-usable Spools and the fact to save filament, a re-usable spool from BambuLab is required. It is more ore less an adapter that the masterspool coils can fit on it.

I am not a big fan of printed screws, so i decided to put this pieces together with metal screws. You will need:

• 3x M3 Nut
• 3x M3 DIN912 L=16mm or longer (not longer that 60mm)
• Empty BambuLab Re-Usable Spool

It worked with my master coil pretty well. It is not as comfortable as printed screw version but i like it that way.

Carrier printed in eSUN PLA+ White and the Spacer is printed with eSUN PLA+ white/orange multicolor.

2023-03-21: I added version 03. It has holes to push the inner ending of coil into.