Enclosure window latch with magnet
Just a simple latch with magnet to keep the windows of an enclos closed and avoid bouncing when printing at high speeds.
3
30
0
224
updated
March 16, 2023
Description
PDFI had my windows closed with two magnets at each side but when printing infills at high speeds the windows bounced and didn't stay still. This is a simple design to be screwed at the middle of the enclosure and close the window using two magnets.
I used two 3,5x20mm screws and 14.5mm diameter magnets (3mm high).
Supports are not needed.
Tags
Model origin
The author marked this model as their own original creation.