Snowboard Tuning Stand for 3/8" Bolt

Remix of a remix. Following changes:

• Adds the missing knob, sized for 3/8" bolt
• Adds a retainer for the nut
• resizes the hole in the tuning stand to accommodate the height of a 3/8" nut
• Resizes the hole in the bolt cap to accommodate a 3/8" bolt

Print instructions

I printed everything out of Green Gate 3D PETG.

Tuning stand is printed with 60% gyroid infill.

Bolt cap is printed with 30% infill, except the bottom 2.5mm is printed at 100% infill.

Knurled knob and nut retainer are printed at 100% infill.