Minimal LTT Screwdriver Skadis Holder - TNut

Overview

This is a heavily modified and slimmed down version of my LTTStore screwdriver mount for my Ikea Skadis, which uses the T Nut System made by 6d6178 and was made using dimensions from MiniMadRyan's LTT Screwdriver Mockup. My skadis is mounted to my Raskog Cart and I wanted a semi snug fit without being too annoying. It was also a different type of designing for me, I wanted to really use projections to design something that feels better formed from my original. I am very happy with the results.

T Nut Screw Specs

The T nut system uses M2 or M2.5 screws to mount to the IKEA SKÅDIS pegboard system. 

I'm only including an M2.5 version here because to be honest, it is what I had on hand and don't think many people use the M2 version. 

• The longest screw you can use is 24mm long ex. M2.5x24
• The shortest screw you can use is 12mm long ex. M2.5x12

I personally used these: https://www.mcmaster.com/91290A104/ but McMaster-Carr is expensive, so you could use Amazon if needed to find them. 

You might have to use supports, depending on your printers overhang skills, etc. YMMV. Print the mount of + one of the T Nuts (M2.5) from here. 

Terms

Your results obviously may vary. As of publishing this model, I am out of town and won't be able to test fit. I am still new to CAD and although I think this design is pretty sound, I'm not sure. Please feel free to give feedback, it is most welcomed. Thanks and happy printing.

Updates

I will update this section as needed to give an overview of how progress is being made. It is my goal to constantly improve based off of peoples feedback.