If you built an enclosure, you probably have heard that your PSU should live outside of the hot box to ensure the longevity of your equipment safety.
This design allows you to mount your Ender 3 Pro's PSU unit to a wall using wood screws. The quick release design allows you to dismount at ease and firmly secure to the wall. The unit is designed with french cleat influence and the locking mechanism allows for an additional sturdiness.
This design uses the following hardware :
(2) M4 Screws, round hex head diameter of 6.86mm, 14mm in length.
(1) M3 Screw, round hex head diameter of 5.38mm, 10mm in length.
(4) Wood screws, round head diameter of 7.7mm.
Best printed with PLA. Mine were printed with 0.8mm nozzle.
The author marked this model as their own original creation.
