Spider Hotend Shroud

Dual 4010 blower fans, single stock hotend fan. Spacer mounts between the shroud and the mounting bracket on the V2 - required for the shroud to clear the button head roller bolt. If everything is appropriately sized the spacer and shroud will slide on the mounting plate protrusions and the hotend will mount as normal resulting in everything being secured by the hotend. Blower fans slide in place, depending on your print settings you may need to shim the fans to keep them secure - pieces of a brim work well for this. Hotend fan slides over the 4 posts. You're on your own for wire routing - I used an extra bracket from my CR touch. This shroud will clear the CR touch if mounted with its included bracket. I printed it in PLA+ with supports under the ducts and the fan boxes. No deformation noted with the hotend heated to 300 w/no part cooling for 10 minutes. No issues noted when printing with PLA+ @ 210. Will update if any issues are encountered during use.