Cr-10 Smart Display Side Holder

I upload 2 files

First: is the one you find on the picutes. That the version i use.

Second one: i close the side as it was not needed to be a hole there.

But its up to you what you will use or maybe you will change it in the way you need.

I recomment to print it in upside down by 15 degrees with normal supports.

Flip it in the front that all 3 screw holder get a small support. was working at me pretty well.

With Standard quality it works pretty well.(you can find a pic)

Dont be afraid to push it strong inside. it fit perfect.

Print info:

71g

10 Hours 52 min

Standard Quality 0,2mm

Have fun by printing.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

Doesn't Matter

Supports:

Yes

Infill:

30%

Filament: