58mm Gaggia Classic Pro Portafilter stand

The file is for the stock 58mm portafilter holder for the Gaggia Classic Pro.
after searching for and printing several stands that didn't quite fit the way I expected I designed my own to exact specs of the stock filter.

The slots line up perfectly for the portafilter to fit snug enough in the stand to get a good tamp, while allowing you to remove the portafilter without disturbing the puck.

I've included the stl file and the 2-color 3mf project file
 

You should be able to print this with pretty standard settings, however I would recommend at least PETG as the portafilter will generally be warm when using the stand.
The stand is 67.50mm in height
Print time is about 3.5 hours on my BambuLab X1C printing at 90mm/s