Giant Pencil Pencil Case

Okeydoke! As of this writing, NONE of these pieces has been tested in my printer, so buyer beware. 

The interior cavity is 17.6mm x 205mm. Theoretically, the model should be able to hold four 7x19cm pencils, though that might be pushing it.

The Model:

There are a few variations of this model depending on how much you hate your life and how many colors of filament you have:

• EASIEST/one color
  • just print the file with both pieces in one color. Badaboom.
     
• NOT TOO BAD/two colors 
  • pencil printed with tip and, separately, eraser and ferrule printed together
     
• IF YOU HAVE SOME TIME ON YOUR HANDS/three colors
  • pencil printed with tip and, eraser and ferrule each printed separately and assembled after printing.
     
• PROJECT FOR A LONG WEEKEND/four colors
  • pencil without tip, pencil tip (sharp), eraser, ferrule
     
• MOST MASOCHISTIC/will also look the most awesome/five colors
  • Pencil without tip, tip with hole for lead, lead tip, eraser, ferrule

I did my best to keep the tolerances in the range of 0.2-0.25mm.

Printing:

hahahaaaaaaaaaa. Yeah. 

I'll keep you posted.