Case for QC3.0 QC2.0 USB DC-DC Buck Converter, Charging Step Down Module 6-32v

Bought this 2 port DC-to-USB buck converter, and needed a case for it.

Here's the item:

https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099513216091

It's pretty straightforward, print both sides flat as in the STL. My DC plug actually was soldered crooked so I had to shave some of the plastic from the side to make up for it, but I'm sure most will turn out fine as is. 

Just use 4 3mm screws to fasten it down.

I used Prusaslicer's text function to add the text to the bottom.