Vote!

Strong Words Collection

Vote!

Democracy is not a spectator sport. It's the responsibilith of every citizen to vote.

Multi-color Print

This is a 5-color 3D print designed to be printed on a Prusa Mk3S with MMU2S multi-filament attachment.

Button Backs

The bottoms of these buttons have varied from open to accept expoxied bar pins, push pins, clip pins, spring pins and magnet attachments. The files uploaded are the final design interation for securely epoxing bar pins to 3D printed buttons using a tab and epoxy to contain the pin. Put small dab of epoxy just below the tab, push bar pin onto dab and slide pin under the tab. Pin is locked, centered, and secure.

And...

I test, optomize and tune small batches of 5 color buttons then run sets of 25 or so on Prusa Mk3s MMU2s to minimize purge blocks waste.

Model files were created using Illustrator and Rhino3D, converted to STL files and each color is exported with origin.

Print instructions

Category: Coins & Badges Summary

Strong Words Collection

Vote!

Democracy is not a spectator sport. It's the responsibilith of every citizen to vote.

Multi-color Print

This is a 5-color 3D print designed to be printed on a Prusa Mk3S with MMU2S multi-filament attachment.

Button Backs

The bottoms of these buttons have varied from open to accept expoxied bar pins, push pins, clip pins, spring pins and magnet attachments. The files uploaded are the final design interation for securely epoxing bar pins to 3D printed buttons using a tab and epoxy to contain the pin. Put small dab of epoxy just below the tab, push bar pin onto dab and slide pin under the tab. Pin is locked, centered, and secure.

And...

I test, optomize and tune small batches of 5 color buttons then run sets of 25 or so on Prusa Mk3s MMU2s to minimize purge blocks waste.

Model files were created using Illustrator and Rhino3D, converted to STL files and each color is exported with origin.

Print Settings

Printer Brand: Prusa

Printer: i3 MK3 MMU 2

Rafts: No

Supports: No

Resolution: 0.15

Infill: 15%

Filament: Innofil, Filament One, Atomic PLA RED
Notes:

Innofil red, yellow, white, green, black, pearl white, silver FilamentOne True Blue, Iron Gray, Glints of various colors Atomic Bright Red, Perfect Yellow Various Silky Effects, Transluscients