Adjustable Foot (for tables, chairs, etc.)

This is an adjustable foot for tables, chairs, or anywhere else you would need to adjust the height of something. It uses a 17 mm Hex bolt and corresponding T-Nut or threaded insert for wood. Simply glue or epoxy the hex bolt into the foot and drill a hole to accept the t-nut and you're done.

For a stronger foot I would use up to 8 walls and higher infill. I used 8 walls with 50% infill and 100% infill at the top where the bolt sits to help it accommodate the weight of the project.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

.2mm

Infill:

30-50%

Filament: GST3D PLA+ Black

Notes:

For a stronger foot I would use up to 8 walls and higher infill. I used 8 walls with 50% infill and 100% infill at the top where the bolt sits to help it accommodate the weight of the project.