60MM Fan Grill with an angled shroud

This simple fan grill is intended to be used with the PitStop extruder mod: https://mihaidesigns.com/pitstop

This grill/shroud is angled at 30 degrees and designed to reduce backflow towards the left of the print bed and to reduce the turbulence noise caused by the original fan grill.

Tested on:

Pitstop Extruder (MihaiDesigns)
Stock Frame
Adapted/Revised X-Axis (MihaiDesigns)

Print instructions

Printed in PETG at 0.48mm layer height with no supports.