Modified "Planter Netcup" For Hydroponic Tower

This modified "Planter Netcup" has a small catch to prevent the net cups from tipping over when the plants grow too big. It is designed to dimensionally fit the net cups as shown in the picture.

When screwing in the "Planter Netcup" into the planting module, take care that the catch is located at the highest point.

Printed with:

• Prusament ASA Prusa Orange @255°C on Anycubic Mega X (direct drive)
• 0.4mm nozzle
• 0.3mm layer hight
• 20% grid infill