Arcade Button NeoPixel (WS2811, WS2812B, SK6812) RGB LED Mod

This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8

Buttons: https://www.aliexpress.com/item/33001974422.html

LEDs: https://www.aliexpress.com/item/32960205936.html

ESP32 source code example: https://github.com/FastLED/FastLED/blob/master/examples/ColorPalette/ColorPalette.ino

0.2 layer height work but 0.15 or 0.1 is recommended.

Print instructions

Category: DIY Summary

This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8

Buttons: https://www.aliexpress.com/item/33001974422.html

LEDs: https://www.aliexpress.com/item/32960205936.html

ESP32 source code example: https://github.com/FastLED/FastLED/blob/master/examples/ColorPalette/ColorPalette.ino

0.2 layer height work but 0.15 or 0.1 is recommended.

Print Settings

Printer Brand: Creality

Printer: Ender 3

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2mm

Infill: 10%

Filament: Generic PLA Gray
Notes:

Print this sideways to make it strong in the direction of flex or print it in PETG. At the moment there is a lot of supports to remove :(