Created this based off one of the Gorillaz logos. I've included one file with the standard 45 adapter measurements but it did not fit on my record player.
Model has a depth of 10.25 mm which should be enough to cover most record players.
If you are unsure on which model to print, print the large one
I have tried several sizes and the 8mm seems to work best due to the tolerances, but your results may vary
This is not a multi material print. I don't have a printer with multi-filament swapping. So for this one you can just swap the color at the specific layer height.
You can find a guide here
Printed with 0.4 mm nozzle at 0.2 with PLA and ironing of top layers enabled.
The author marked this model as their own original creation.