Storage for sponge

Storage for sponge

Storage for 4 sponges, separated by 3 parts:
 

• A base (for the water flow);
• A grid (for the passage of water);
• A storage for 4 sponges.

- Printing characteristic :

Print: 0.2-0.3mm
Nozzle: 0.4mm
Perimeters: 3 
Support: Not required
Brim: Not required
Infill: 15-30%
Fill pattern: Support Cubic

- Assembly :

Just stack them but if you don't like it you can always add glue stitches.