Tea shipping container- literally

Transport container model for tea. It does not exactly match the scale of containers used on cargo ships, but is adapted to standard sizes of envelopes and tea bags.

I have prepared several variants of covers with the names of different countries from which the tea stored in the containers may come from. I suggest distinguishing between types of tea by colors; for example, green and black for their respective types. I have also prepared two variants of the container itself - the first one without compartments, which will be perfect for tea bags or loose tea, and the second one with compartments, which is intended for envelopes with tea.

When printing the covers, it is very important to set the bridge angle so that it is perpendicular to the holes. By printing both the cover and the box at the same time, it is easy to achieve a very nice effect of the top and bottom of the container in different colors. It is enough to change the filament color after a few initial layers.

When printing with a 0.8 nozzle, there is no need to use supports. However, in the case of a 0.4 nozzle, supports may be needed for the "TEA SHIPPING" inscription on the side of the container. Because the walls are quite thin, I recommend not rushing the print. Unfortunately, I wanted to meet the deadline for the competition and set the speed too high, which unfortunately had a negative impact on the print quality.