X Axis Belt Tensioner Base (Anycubic Kobra)

X Axis Belt Tensioner (base part) for the normal kobra. Works together with Nut and Bolt part from Thumquas (kobra Go).
21
118
1
833
updated March 29, 2023

Description

PDF

For pulley mounting, you will need the m3x16 screw (x1 for each axis) and of course the 20 teeth, bore 3mm width 6mm Pulley itself (x1 for each axis) already mentioned by Thumquas.

For mounting the tensioner, you can use the screws from the original kobra tensioner.

I've made the fitting a little bit tighter so absolutely no more “wobble” is possible.

printed vertical, 15% infill with no supports and layer height of 0.2 mm PLA.

Tags



Model origin

The author remixed this model.

License