coat hanger system

This is a holder system for hanging coat hanger on a rod.
It´s designd for a rod with a diameter of 16mm.
Cut the rod to the desired length, mount the holder to the wall, clip the rod into the holder and put on the cover.

The cover is with a kind of Bajonet-System designd, put it on the holder and turn it anticlockvise and it will never come loose.

I used a curtain rod

Print instructions

Category: Organization Summary

This is a holder system for hanging coat hanger on a rod.
It´s designd for a rod with a diameter of 16mm.
Cut the rod to the desired length, mount the holder to the wall, clip the rod into the holder and put on the cover.

The cover is with a kind of Bajonet-System designd, put it on the holder and turn it anticlockvise and it will never come loose.

I used a curtain rod

Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0,15

Infill: 30%

Filament: 1.75 PLA PLA white