Silica Gel Regenerate Jar

I have been regenerating silica gel using methods such as microwaving or pan-roasting, but they have always been a tedious process that required constant monitoring. However, when I came across a product called a 'proclaimed dehumidifier' on Amazon, I realized that it was simply a container filled with silica gel and a drying machine. 

Normally, only specialized containers can be used for drying, but with the container I designed, you can easily regenerate your silica gel using this drying machine without any hassle. 

The drying machine is compatible with the following types of items:

https://a.co/d/2DlVEH2

https://a.co/d/9TThRlq

Print settings: 

• Filament: Cap PC, Jar PETG
• Layer height: 0.3mm
• Supports: no

Notes:

• When printing the cap part using PETG, it was found to be deformed by heat. It is recommended to use materials such as ABS or PC instead.
• In vase mode printing, it is recommended to use a 0.6mm or larger nozzle and large value the external perimeters.

My Other Models:

Silica Gel Container 40mm Diameter - https://www.printables.com/model/261699-silica-gel-container-40mm-diameter