Teen Titans Communicator

Dual extrusion is not required for this print. When printing core.stl, just switch the filament from white to black after the first 16mm, or after you see the outline of the T in the layers.

Print led.stl hollow and spiralized, with a translucent filament. I got these results with a .6mm nozzle - because I misplaced my .3mm. Insert it into the casing from the inside before assembling with the core.

Print antenna.stl with a brim and trim it partially. The flexible brim keeps it from falling out of the casing. Alternatively, glue it in place.

I used a thin paint that was easy to brush around for the padding space between the buttons of casing.stl.

The assembly includes a pilot hole for an M3 fastener, which can be used to attach a belt clip.

Print instructions

Unassociated tags: #CostumeChallenge

Category: Costume Summary

MMU is not required for this print. When printing core.stl, just switch the filament from white to black after the first 16mm, or after you see the outline of the T in the layers.

Print led.stl in vase mode with a red translucent filament. Insert it into the casing from the inside before assembling with the core.

Print antenna.stl with a brim and trim it partially. The flexible brim keeps it from falling out of the casing. Alternatively, glue it in place.

I used a thin paint that was easy to brush around for the padding space between the buttons of casing.stl.

The assembly includes a pilot hole for an M3 fastener, which can be used to attach a belt clip.