NES Game Manual Frame v2 (new design)

My old frame was good, but I wanted something a little simpler and more sturdy and all-in-one print...
6
9
0
129
updated March 16, 2023

Description

PDF

My first model was good, but I wanted better.

This one is a simple print, all in one, with a slot to drop your NES game manual straight into.

The base is thicker and taller than before.

It just looks and works better this time (at least for me).

If you use a protective sleeve on your game manual, it may stick out the top (see pics). I may add another STL that extends higher for that, but I like it sticking up a tad so I can easily pull it when needed… but for aesthetics, I will probably add another soon. Let me know if that is something you may want.

I printed mine:

  • Polymaker Black Matte PLA
  • .28 height / . 48 line width / .4 nozzle
  • 33% line infill (Cura) for weight on the bottom, but you can go much lower
  • 90mm/s infill
  • 40mm/s outer walls
  • 50mm/s everything else
    •  except support which was at 25mm/s - Cura 5.2 tree supports

 

Tags



Model origin

The author marked this model as their own original creation.

License