Stargate Naquadah Generator, Prop

History/Story of the Naquadah Generator: https://www.gateworld.net/wiki/Naquadah_generator 

Prop utilizes Magnets to activate lights (when Control Interface Handle is in the on position it activates a magnet activated switch turning it on) and the access hatch lids magnetically attach. 

Purchased Parts: (This list is stuff I had and used for this project, no need to buy from any of these links. The list is just here to help you see what parts you'll need and estimate your cost to make one)
Magnetic Induction Switch: https://www.amazon.com/gp/product/B07YFBQ4HS
Neodymium Disc Magnets, 8 x 3mm: https://www.amazon.com/gp/product/B097HCT43 
5mm Blue LED Lights: https://www.amazon.com/gp/product/B07T9LGGJW 
5mm White LED Lights: https://www.amazon.com/gp/product/B07T8H6V37 
12V LED Strip Light: https://www.amazon.com/gp/product/B00HSF66JO 
Arduino Nano Every: https://www.amazon.com/gp/product/B07VX7MX27 
DC-DC Buck Converter: https://www.amazon.com/gp/product/B08Q34TYV5
N-Channel Power Mosfet: https://www.amazon.com/gp/product/B07CTJFG7M 
Wire: https://www.amazon.com/gp/product/B009VCZ4V8 
DC Power Jack: https://www.amazon.com/gp/product/B01N8VV78D
DC Power Jack Adapter: https://www.amazon.com/gp/product/B015OCV5Y8 (Optional, you could use the Cable Port (Blank) and the above other power jacks)
Super Glue and Epoxy: (to glue everything together. I used epoxy on a few spots that I wanted a stronger hold on)
3 1KG spools of plastic: (You might be able to get by with 2 Spools, but I had a few parts to re-design LOL)
Heat Shrink: multiple sizes
Hot glue gun kit

Parts To Print:
2x Reactor Globe
2x Reactor Globe Inside
2x Reactor Globe External Cable Port
2x Reactor Globe Access Hatch
2x Intermix Flow Chamber Base
2x Intermix Flow Chamber Base Attachment
6x Intermix Flow Chamber Disk
2x Intermix Flow Chamber End
2x Intermix Flow Chamber Crystal 1
6x Intermix Flow Chamber Crystal 2
8x Intermix Flow Chamber Globe Slide
8x Intermix Flow Chamber Housing Rod
8x Intermix Flow Chamber Housing Rod Washer
2x Intermix Flow Chamber Housing Rod Base Attachment
2x Intermix Flow Chamber Housing Rod End Attachment
1x Base Pins
1x Control Assembly Bottom Cone Pins
1x Base Cone Pins
1x Center Base
1x Center Base Cone
1x Control Assembly Pins
2x Control Assembly Cone Spacer 1
1x Control Assembly Cone Spacer 2
1x Control Assembly Bottom Cone
1x Control Assembly LED Crystals
4x Control Assembly Upper Cone Power Crystal
1x Control Interface Handle Connector
1x Control Assembly Upper Cone
1x Control Shelf Pin
1x Control Shelf Light Shield
1x Control Interface Handle
1x Control Shelf
2x Intermix Flow Chamber Connector Crystal
1x Intermix Flow Chamber Connector

Optional:
Reactor Globe External Cable Port (Blank) *** only if you want a different style cable port or no opening ***
Handle Inside Spacer *** used to align the magnetic switch ***