Lamp C Clamp

Build at 0.2 layer height for thread to be printed correctly, I would suggest using ASA, PETG or PC. The support disc to screw is a push-in, clip-in ball joint socket. Also clean the threads after print before assembly. Also support disc is installed after threading the screw into the C Clamp.

Changelog:

v2.1  2024-04-14

• Added version with M3 screw holes to help prevent cracking in corners

v2.0  2023-09-15

• Made rounded corner inside “C” to help prevent cracking from 90 deg corners

v1.2  2023-06-05

• Added double wide version, for when more holding force is needed

v1.1  2023-03-17

• Added a Interference fit tube to provide better fit and hold for not level installations.
• Added individual STL files, one can print the C-Clamp flat on one side at 0.3mm layer height (or bigger if you have the right nozzle). the screw needs to be printed at 0.2 or smaller layer height to get a good thread.

v1.0  2023-03-11

• Initial Release