Oil Bottle Holder

A custom made oil bottle holder originally made for the following bottles from Amazon US: https://www.amazon.com/gp/product/B09BCJSFFJ 
However, since originally printing this, I replaced the bottles with the Oxo oil bottles, and they fit just fine as well as they have similar dimensions. https://www.amazon.com/OXO-Grips-Precision-Vinegar-Dispenser/dp/B07WHF7ZP5

This was custom made using Fusion 360 to hold the bottles and has a small handle to allow for carrying if required.

Supports were not used in this print, but the circular part at the top did have some slight drooping because of it.

This was printed at 0.2 layer height with a 0.4mm nozzle and 35% infill.

Additionally when I printed this, in Cura 5.1.0 the following experimental settings were used for the print:

• Use Adaptive Layers: Yes
• Enable Bridge Settings: Yes