Elmer Fudd - Onepiece

Elmer J. Fudd, a fictional cartoon character in the Warner Bros. Looney Tunes/Merrie Melodies series.

This is a onepiece version of Elmer based on my multi-part Elmer model that I've previously posted.

Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting.

I converted my multi-part model to a onepiece model for SLA and FDM printing.   Kyler then proceeded as follows:

Decreased scale to approximately 35% of the original scale.
X-Axis = 1.47 Inch, Y-Axis = 1.75 Inch, Z-Axis = 3 Inch
Printer: Anycubic Photon M3
Resin: Anycubic Water-Washable Grey
Exposure time: 2.5 seconds
Print time: 5-hours
Lychee Estimate print time: 2-Hours 4-Minutes

Note: Something important to call out regarding print time.  Kyler has his screen power set to 80% power. This increases print time significantly but extends screen life. This might be important for individuals going forward.

Other notes regarding the supplied STL file:

For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports.

Enjoy!