Stackable Wall Mount Storage Boxes

These little boxes can be stacked or mounted to a wall. Great for organizing hardware and other small, miscellaneous items around the house or shop. So far there I've only designed two container sizes, but I intend to design some more. I made these specifically for my needs in my workspace, but since I actually like how these turned out I figured I'd share them. 

The dimensions for the box are the internal dimensions of the box with the 1.8mm wall thickness. The measured dimensions of the 1.2mm wall thickness boxes will be slightly larger. I'd recommend printing these in either PETG or ABS/ASA. I use a 0.6mm nozzle on my Voron for just about everything and it makes short work of both, but obviously the 1.2mm wall thickness boxes will print much faster. 

Make sure to print the clips with the appropriate box depth you intend to use - 35D, 40D. The mounting holes are designed for #8 wood screws with an 82deg head though you could get away with #6 instead.

Suggestions are welcome. I will do my best to meet reasonable requests, but I do have a full time job and kids, so whether or not I actually get around to doing it is totally up in the air.