KP3S or KP3S Pro, Sherpa-mini and NF Crazy/Mosquito lightweight toolhead

The fan duct now has plenty more air flow and as you can see from the picture, the spider was printed with 50% fan in abs.
 

BOM:
- 2x m3x5x4 heat inserts (same as voron kits use)
- 3x m3 nuts (2 for bltouch, 1 for 5015)
- 2x m3 washers for the sherpa mini, feel free to use more wherever

Variety of m2.5 screw:
- 2x mounting screws for the plate to the heatsink from the top
- 2x m2.5x15 for 2510 fan
- 2x m2.5x8 for securing the heatsink from the back

Variety of m3 screws:
- 1x m3x22 for 5015 fan
- 1x m3x10 for right side of sherpa
- 1x m3x8 for front of bltouch
- 1x m3x14 for back of bltouch + left of sherpa

1st picture is an NF crazy, 3rd picture is a mosquito