Creality camera mount

This is Creality camera mount for Creality Ender-3 S1 Pro printer. When creating the model I was inspired by another version of the camera mount stored in Creality Cloud https://www.crealitycloud.com/model-detail/639e4af56c860e2fe288d88c but re-created it from scratch. The main idea was to direct the camera to the nozzle as accurate as possible. I place the rotating camera plate at 15 degrees to the horizont. Placing camera this way is rather good to watch over the printing process but not very good for making printing timelapses.

The only inconvenient thing is that at the lowest Z-axis point the camera becomes very close to the display over its far edge. At this point you have to turn the camera around to allow normal operation with the touch screen. To avoid this I changed dipslay mount to move display a bit forward and shift it over the printer's base. Modified display mount can be found here: https://www.printables.com/model/496168-display-mount-for-creality-ender-3-s1-pro

The model consist of 4 parts:

1. Mounting bracket
   • Part1 for Ender-3 S1 Pro
   • Part1 for Ender-3 Pro
2. Rotating plate 
3. Connecting pin
4. Camera screw

Connecting pin fits two parts rather loose as it only requires for rotation. Any metal screw and a nut of a proper size would also be ok. 

I would recommend printing the screw with 0.12 layer for better thread accuracy . Printing other parts with 0.2mm or even higher layer would be fine. I used supports only for camera plate placing it with a main plate horizontally to the bed.

UPDATE:

Added Part1 designed for Creality Ender-3 Pro 3D printer. It supposed to be mounted on a horizontal 2020 v-slot rail at the rightmost position. I created this version of the Part1  after a comment recieved from Printables user. Unfortunately I don't have that printer model to check if the new part fits so i would appreciate if you could leave a feedback. I attached a picture showing the potential mounting point for this part.