Ender 3 S1 / S1 Pro heating bed cable chain/holder + gulfcoast heated bed prototyps

Be one of ten who leave a Like at Printables and support me with it :)

Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor.
It can be attached to the underside of the housing and to the recess for the stepper motor.

I only needed support and brim for the ground plate, I have attached a picture for this purpose. The rest of the parts can all be printed without support and brim.
 

I did the customization for the S1 together with Bluegooglueygley. If something still needs to be adjusted, please contact me ;)
For the base plate of the S1 you can use a M3 screw or just a piece of tape to fix it to the bottom of the case.

I added prototypes in collaboration with John Fleming for use with a gulfcoast heated bed.

Quantity:
1x Ground plate
1x Hook 
1x Chair link end
3x Chair link
4x Clip

Walls: 3
Infill: 10%
Layer: 0,2mm

User DKVisions has created an adapter in case someone wants to run the cable chain all the way to the print bed.

Check out my other designs too!