Canister with threaded lid

Wanted to learn how to create working threads in Fusion 360 and made this.  The lid is a bit tight and needs to be worked in but it does seal. 

When printing the lid make sure to have the top on the build plate to save support.

Settings from Makerbot Print

Base Layer      Raft

Layer Height (mm)     0.2mm

Infill Density        10%

Number of Shells      2

SupportsBreakaway - Model Material

I'm going to reprint it on my CR-10 without a raft or support material and increase the shells to 3 or 4 for added strength.