Bambu Labs Spool Desiccant Carrier

Strongly recommend this remix/remodel

------------------------------------------------------------------------------

A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.

Pre-configured 3MF for Bambu Studio or use the high resolution STEP file (split it into parts in your slicer of choice). If you have a different spool, the Fusion file can be tweaked to match.

Print with 6 walls, 0 top/bottom layers, and35% honeycomb infill to get that lovely desiccant-holding grid effect; takes just a bit over an hour.