Hotend Touch Sense Assembly

This is a sloppy mix of two projects done by other people. The touch sense thingy was meant for delta printers so I had to mod it heavily, and the other part needed tweaking to work with it. Some of the parts will need to be downloaded from the other guys, including the Prusa I3 rework X-Carriage. I will try and improve the info here later after I have printed everything and tested it. I did all the editing in Solidworks and my files would be available on request even though the manner in which I did my edits quite horrifying to anyone who has spent any time working with Squalidworks. I'm still lacking the photos necessary to show what this actually looks like but I will add them as soon as I can.

Update.

I printed all the parts and it seems like everything works as it should except for the 30mm clip with venturi. I was not able to snap the 5015 adapter clip into place the way I thought I should be able to so I edited it so that it slides in from the rear and re-uploaded.

Update 2

It seems that the part I re-uploaded is the same as the one I deleted. I will not be able to do anything about it until tomorrow, but I will get to it at some point.

Update 3

I uploaded the correct part now, but I left V2 there because I was able to make it work by trimming a tiny amount of plastic away with a knife.