The mount is designed for this Pi cam https://www.amazon.com/dp/B07DPNDP6R and works with probably any Pi OS. I use it with Octoprint, just because that's what was on the Pi already. The camera has a lens that can be rotated to adjust focus so you can center the focus where you want it. Clips into the two little square holes on the cross bar on the right side. You'll want to move the chamber light to the same side, the cable for the light should be just long enough to make it. However, this camera is a night vision camera so if you don't have a light, you won't need one.
The model can accommodate the camera with the cable either up or down depending on your needs and where you choose to leave your pi.
Print it in the provided orientation, should only need supports under the bits that that pop into the square holes on the printer frame. I used manual tree supports, 3 walls, and 15% 3D honeycomb infill.
Please don't roast me on the failed print pile lol
The author marked this model as their own original creation.
