Bit stick with driver

Added short and medium handles

==============

Parts in STLs are oriented for printing.

Printed in ABS with 0.2mm layer height. Other materials might work.

Support needed for:

• MidPart_25mmBit
• BitHandle (Inside the hole for the bit)

Needed hardware for the handle:

• 1x DIN7991 M3x16
• 1x BallBearing 11x5x4 (OuterDia x InnerDia x Width)
• 1x Heat Insert M3x4x5
• 2x Magnet 6x3mm

BitHandle Assembly:

• Press the magents into MagnetHolder.
• Put MagnetHolder into BitHandle and screw in MagentScrew with flathead screwdriver
  (Yeah, this may take some time :-)
• Assemble heat insert into SpinnerBase and screw into handle
• Press in the BB into SpinnerBB
• Use M3 screw to fix the SpinnerBB to SpinnerBase

Note: After printing you may have to give the hole in the mid part a light sanding for easy clearance to the handle. This depends on the quality of your support.