Mugen MBX5 Chassis Brace

Extra brace to stiffen the chassis of a Mugen MBX5,6,7 etc. The original front and rear aluminum braces don't stop the chassis from flexing in the middle. This eliminates all chassis flex.
You will also need a piece of 9mm od aluminum tube, I used a bit of gel blaster/Airsoft barrel. you can buy them on any online store cheap, AliExpress, Ebay, Bangood etc. I cut mine at 137mm and epoxy glue into place.
The forward piece has supports you will need to break off and will need good bed adhesion.
Print slow (25 of 30 speed) for best results.